Silent X-Stream™ Frigid-X™ Panel Cooler | Nex Flow Air Products

Silent X-Stream™ Panel Coolers

Pangkalahatang-ideya ng Produkto

Ang Silent X-Stream™ Frigid-X™ Panel Cooler series para sa elektronikong control panels ay nagkakaloob ng murang paraan para sa parehong pagpupurga at pagpapalamig ng elektrikal at elektronikong control panels sa pamamagitan ng paggamit ng isang hindi kinakalawang na tubong vortex upang lumikha ng malamig na tubig mula sa ordinaryong nakumpres na hangin. Sa paggamit ng isang mainit at malamig na dulo na muffling kit, ang yunit ay ginawang napakatahimik sa babang 64 dBA depende sa kapasidad. Ang mainit na dulong muffler ay nagsisilbi ring isang “heat guard” – maaari mong balutin ang iyong kamay sa paligid nito nang hindi nakararamdam ng init. Ang mainit na hangin ay maingat na inilalabas sa ilalim ng mainit na dulong muffler.

Ang panel cooler series ay siksik at maaaring i-install ng ilang minuto gamit ang isang standard na elektrikal na pagsasaayos. Walang mga anumang gumagalaw na parte.

* US numero ng patente 8,616,010 / Ibang mga bansa: Patentado o Hinihintay na maging Patentado

Tandaan: Palaging kwestyunin ang hindi-aprubadong mga yunit na ginamit sa mga elektrikal na langkap upang masiguro na ang iyong panels ay hindi mapipinsala ng mga mahinang produkto.

Mga Tampok / Kapakinabangan

  • Mura
  • Siksik
  • Walang CFCs
  • Mabilis na instalasyon
  • Pinatatatag ang napapaloob na temperatura at kahalumigmigan
  • Tunay na walang pagmementena (Walang mga Gumagalaw na Parte)
  • Naitatayo sa isang standard na elektrikal na pagsasaayos
  • Hinihinto ang pinsala ng init at istorbong tripping ng koryente
  • Tinatanggal ang mga fan at panala
  • Pinipigilan ang kontaminasyon ng dumi sa pagpapanatili ng positibong presyur sa loob
  • Naaangkop ang mga yunit sa lahat ng kapaligiran kabilang ang mataas na temperatura hanggang 200ºF

Mga Video

How The Silent X-Stream™ Panel Cooler Works

The regular Frigid-X Panel Coolers are under 78 dBA for noise level but in some instances it is not enough and a quieter version is necessary.   This is where the Silent X-Stream Panel Cooler can be utilized. It can reduce noise levels to 65 dBA   It works the same way as a regular Panel Cooler where compressed air enters at point (A) into the vortex tube component of the panel cooler.  The vortex tube creates two streams of compressed air – a hot stream at (B) and a cold stream at (C). The hot air stream from the vortex tube is vented outside the system at (D) after internal muffling. An additional Hot End muffler (I) reduces the noise further and also acts a protection cover over the hot end should anyone try to grab the unit.   Hot air from inside the control panel is vented at point (E) to the outside. Cold air goes into the control panel at (F) into an additional cold end muffler (J) and then into the cold distribution hose (G). Holes (H) are punched into the hose kit to distribute the cold air inside the panel. A muffler (I) further reduces the noise level of the exhausting at the end of the hose.

As with the standard Panel Cooler there is the optional Thermostats and Solenoid Valve System and Electronic Thermostats System for on-off control and Bypass system if constant purge is required inside (to keep out a dirty environment).

Dimensions

Cabinet Cooler Dimensions

Seleksyon

Panel Coolers, Panel Cooler, Panel Air Conditioner, Cabinet Enclosure Cooler, Electrical Panel Air Conditioners, Cabinet Cooling Solution, Cooler Master Cabinet, Panel Air Conditioner, Adjustable Thermostat, Electrical Panel Coolers, How to Cool Electrical Enclosures, Electronic Temperature Control

Ang lahat ng yunit 303/304 hindi kinakalawang na bakal para sa makalawang na paligid at mahabang buhay. Sa paggamit ng isang mainit at malamig na dulo na muffling kit, ang yunit ay ginawang napakatahimik sa babang 64 dBA depende sa kapasidad. Ang mainit na dulong muffler ay nagsisilbi ring isang “heat guard” – maaari mong balutin ang iyong kamay sa paligid nito nang hindi nakararamdam ng init.

Silent X-Stream™ NEMA 12 (IP56) Quiet Panel Coolers

  • Silent X-Stream™ NEMA 12 (IP56) Quiet Panel Coolers para sa standard na paglangkap ng kabinet at panels.

Silent X-Stream™ NEMA 3R (IP14) Quiet Panel Coolers

  • Silent X-Stream™ NEMA 3R (IP14) Quiet Panel Coolers para sa paglangkap ng kabinet at panels sa panlabas ng bahay na paggamit.

Silent X-Stream™ NEMA 4-4x (IP66) Quiet Panel Coolers

  • Silent X-Stream™ NEMA 4-4x (IP66) Quiet Panel Coolers para sa paglangkap ng cabinet at panels sa mga nililinisan ng tubig na paggamit.

Contact Nex Flow™ for assistance in sizing cabinet enclosure cooler – Frigid-X series. See Below for Sizing Specifications

MODEL NO. VERSION CAPACITY BTU/hr (Watts)* dBA at 80 PSIG (5.5 bar)
61104X NEMA Type 4-4X (IP-66) Continuous Operation 290 (85) 58
61108X NEMA Type 4-4X (IP-66) Continuous Operation 580 (170) 60
61115X NEMA Type 4-4X (IP-66) Continuous Operation 1100 (322) 67
61125X NEMA Type 4-4X (IP-66) Continuous Operation 1800 (527) 68
61130X NEMA Type 4-4X (IP-66) Continuous Operation 2100 (615) 68
61140X NEMA Type 4-4X (IP-66) Continuous Operation 2900 (849) 69
63104X NEMA type 4-4X (IP-66) on-off control 290 (85) 58
63108X NEMA Type 4-4X (IP-66) on-off control 580 (170)) 60
63115X NEMA Type 4-4X (IP-66) on-off control 1100 (322) 67
63125X NEMA Type 4-4X (IP-66) on-off control 1800 (527) 68
63130X NEMA Type 4-4X (IP-66) on-off control 2100 (615) 68
63140X NEMA Type 4-4X (IP-66) on-off control 2900 (849) 69
60115X-316L 316 L Stainless Steel NEMA Type 4-4X (IP-66) on-off control (customer supplies own filter)** 1100 (322) 72
60125X-316L 316 L Stainless Steel NEMA Type 4-4X (IP-66) on-off control (customer supplies own filter)** 1800 (527) 73
60130X-316L 316 L Stainless Steel NEMA Type 4-4X (IP-66) on-off control (customer supplies own filter)** 2100 (615) 74
60140X-316L 316 L Stainless Steel NEMA Type 4-4X (IP-66) on-off control (customer supplies own filter)** 2900 (849) 76

** In 316 environments normally customers will already have special filtration systems.

*Cooling effect based on 95°F temperature inside cabinet, 100 PSIG (6.9 BAR) compressor inlet pressure, and 70ºF (21ºC) inlet temperature.

BTU/hr. figures rounded to nearest 100 BTU/hr (1 WATT).

All Continuous Operation models include the cooling unit, filter with auto drain and cold air distribution kit.

All On-Off control units include the cooling unit, filter with auto drain, cold air distribution kit, solenoid valve and thermostat.

Calculating Heat Load

Total heat load consists of the heat transfer from outside your panel and from the heat dissipated inside the control unit.

Useful terms and conversions:

1 BTU/hr = 0.293 watts
1 BTU/hr – 0.000393 horsepower
1 Watt = 3.415 BTU/hr
1 horsepower = 2544 BTU/hr
1 Watt = 0.00134 horsepower
1 Square Foot = 0.0929 square meters
1 Square Meter = 10.76 square foot

Typical fan capacity:

4″ fan: 100 CFM (2832 LPM)
6″ fan: 220 CFM (6230 LPM)
8″ fan: 340 CFM (9628 LPM)
10″ fan 550 CFM (15574 LPM)

BTU/hr. cooling effect from fan 1.08 x (temp. inside panel in °F – temp. outside panel in degrees F) x CFM.

Watts cooling effect from fan: 0.16 x (temp. inside panel in °C – temp. outside panel in degrees C) x LPM.

Calculating BTU/hr. or Watts:

  1. Determine the heat generated inside the enclosure. Approximations may be necessary. For example, if you know the power generated inside the unit, assume 10% of the energy is dissipated as heat.
  2. For heat transfer from the outside, calculate the area exposed to the atmosphere except for the top of the control panel.
  3. Choose the internal temperature you wish to have, and choose the temperature difference between it and the maximum external temperature expected.
  4. From the conversion table that follows, determine the BTU/hr. per square foot (or watts per square meter) for the temperature difference.
  5. Multiply the panel surface area times the BTU/hr. per square foot (or watts per square meter) to get the external heat transfer in BTU/hr or in watts.
  6. Sum the internal and external heat loads calculated.
  7. If you do not know the power used in the enclosure but you can measure temperatures, then measure the temperature difference between the outside at current temperature, and the present internal cabinet temperature.
  8. Note size and number of any external fans. Provide this information to Nex Flow™  to assist in sizing the appropriate cooling system.
Temperature Difference in °F BTU/hr./sq. ft. Temperature Difference in °C Watts/sq.m
5 1.5 3 5.2
10 3.3 6 11.3
15 5.1 9 17.6
20 7.1 12 24.4
25 9.1 15 31.4
30 11.3 18 39.5
35 13.8 21 47.7
40 16.2 24 55.6

Example:

The control panel coolers have two frequency drives totaling 10 horsepower and one module rated at 100 watts. The maximum outside temperature expected is 105°F or 40.5°C. The area of the control panel cooler exposed sides, except for the top is 42 square feet or 3.9 square meters. We want the internal temperature to be 95° or 35°C.

Total internal power is 10 hp x 746 watts/hp – 7460 plus 100 watts = 7560 watts.
Assume 10% forms heat = an internal heat load of 756 watts.

Or

Total internal power is 10 hp x 2544 BTU/hp = 25440 BTU/hr plus 100 watts x 3.415 BTU/hr/watt = 25782 BTU/hr.

Assume 10% forms heat = an internal heat load of 2578 BTU/hr.

External heat load: The temperature difference between the desired temperature and the outside is 10°F or 5.5°C. Using the conversions (and interpolating where necessary) we multiply the area by the conversion factor:

42 sq. ft x 3.3 – 139 BTU/hr or 3.9 sq. m x 10.3 = 40 watts

Total Heat Load: 756 + 40 – 796 watts or 2578 + 139 – 2717 BTU/hr.

You would use a Model 61040 for constant operation or a Model 63040 for one-off control. (Rated at 2900 BTU/hr or 849 watts).


Prices are in US dollars – ex works Cincinnati, OH, USA for orders

in USA and Richmond Hill, ON, Canada for international orders.

Tel : +1-416-410-1313   Fax : +1-416-410-180 or +1-716-626-3001

website : www.nexflow.com

email : sales@nexflow.com


Pangkalahatang-ideya

Pangkalahatang-ideya ng Produkto

Ang Silent X-Stream™ Frigid-X™ Panel Cooler series para sa elektronikong control panels ay nagkakaloob ng murang paraan para sa parehong pagpupurga at pagpapalamig ng elektrikal at elektronikong control panels sa pamamagitan ng paggamit ng isang hindi kinakalawang na tubong vortex upang lumikha ng malamig na tubig mula sa ordinaryong nakumpres na hangin. Sa paggamit ng isang mainit at malamig na dulo na muffling kit, ang yunit ay ginawang napakatahimik sa babang 64 dBA depende sa kapasidad. Ang mainit na dulong muffler ay nagsisilbi ring isang “heat guard” – maaari mong balutin ang iyong kamay sa paligid nito nang hindi nakararamdam ng init. Ang mainit na hangin ay maingat na inilalabas sa ilalim ng mainit na dulong muffler.

Ang panel cooler series ay siksik at maaaring i-install ng ilang minuto gamit ang isang standard na elektrikal na pagsasaayos. Walang mga anumang gumagalaw na parte.

* US numero ng patente 8,616,010 / Ibang mga bansa: Patentado o Hinihintay na maging Patentado

Tandaan: Palaging kwestyunin ang hindi-aprubadong mga yunit na ginamit sa mga elektrikal na langkap upang masiguro na ang iyong panels ay hindi mapipinsala ng mga mahinang produkto.

Kapakinabangan

Mga Tampok / Kapakinabangan

  • Mura
  • Siksik
  • Walang CFCs
  • Mabilis na instalasyon
  • Pinatatatag ang napapaloob na temperatura at kahalumigmigan
  • Tunay na walang pagmementena (Walang mga Gumagalaw na Parte)
  • Naitatayo sa isang standard na elektrikal na pagsasaayos
  • Hinihinto ang pinsala ng init at istorbong tripping ng koryente
  • Tinatanggal ang mga fan at panala
  • Pinipigilan ang kontaminasyon ng dumi sa pagpapanatili ng positibong presyur sa loob
  • Naaangkop ang mga yunit sa lahat ng kapaligiran kabilang ang mataas na temperatura hanggang 200ºF
Mga Video

Mga Video

How The Silent X-Stream™ Panel Cooler Works

The regular Frigid-X Panel Coolers are under 78 dBA for noise level but in some instances it is not enough and a quieter version is necessary.   This is where the Silent X-Stream Panel Cooler can be utilized. It can reduce noise levels to 65 dBA   It works the same way as a regular Panel Cooler where compressed air enters at point (A) into the vortex tube component of the panel cooler.  The vortex tube creates two streams of compressed air – a hot stream at (B) and a cold stream at (C). The hot air stream from the vortex tube is vented outside the system at (D) after internal muffling. An additional Hot End muffler (I) reduces the noise further and also acts a protection cover over the hot end should anyone try to grab the unit.   Hot air from inside the control panel is vented at point (E) to the outside. Cold air goes into the control panel at (F) into an additional cold end muffler (J) and then into the cold distribution hose (G). Holes (H) are punched into the hose kit to distribute the cold air inside the panel. A muffler (I) further reduces the noise level of the exhausting at the end of the hose.

As with the standard Panel Cooler there is the optional Thermostats and Solenoid Valve System and Electronic Thermostats System for on-off control and Bypass system if constant purge is required inside (to keep out a dirty environment).

Dimensions

Dimensions

Cabinet Cooler Dimensions

Seleksyon

Seleksyon

Panel Coolers, Panel Cooler, Panel Air Conditioner, Cabinet Enclosure Cooler, Electrical Panel Air Conditioners, Cabinet Cooling Solution, Cooler Master Cabinet, Panel Air Conditioner, Adjustable Thermostat, Electrical Panel Coolers, How to Cool Electrical Enclosures, Electronic Temperature Control

Ang lahat ng yunit 303/304 hindi kinakalawang na bakal para sa makalawang na paligid at mahabang buhay. Sa paggamit ng isang mainit at malamig na dulo na muffling kit, ang yunit ay ginawang napakatahimik sa babang 64 dBA depende sa kapasidad. Ang mainit na dulong muffler ay nagsisilbi ring isang “heat guard” – maaari mong balutin ang iyong kamay sa paligid nito nang hindi nakararamdam ng init.

Silent X-Stream™ NEMA 12 (IP56) Quiet Panel Coolers

  • Silent X-Stream™ NEMA 12 (IP56) Quiet Panel Coolers para sa standard na paglangkap ng kabinet at panels.

Silent X-Stream™ NEMA 3R (IP14) Quiet Panel Coolers

  • Silent X-Stream™ NEMA 3R (IP14) Quiet Panel Coolers para sa paglangkap ng kabinet at panels sa panlabas ng bahay na paggamit.

Silent X-Stream™ NEMA 4-4x (IP66) Quiet Panel Coolers

  • Silent X-Stream™ NEMA 4-4x (IP66) Quiet Panel Coolers para sa paglangkap ng cabinet at panels sa mga nililinisan ng tubig na paggamit.

Contact Nex Flow™ for assistance in sizing cabinet enclosure cooler – Frigid-X series. See Below for Sizing Specifications

MODEL NO. VERSION CAPACITY BTU/hr (Watts)* dBA at 80 PSIG (5.5 bar)
61104X NEMA Type 4-4X (IP-66) Continuous Operation 290 (85) 58
61108X NEMA Type 4-4X (IP-66) Continuous Operation 580 (170) 60
61115X NEMA Type 4-4X (IP-66) Continuous Operation 1100 (322) 67
61125X NEMA Type 4-4X (IP-66) Continuous Operation 1800 (527) 68
61130X NEMA Type 4-4X (IP-66) Continuous Operation 2100 (615) 68
61140X NEMA Type 4-4X (IP-66) Continuous Operation 2900 (849) 69
63104X NEMA type 4-4X (IP-66) on-off control 290 (85) 58
63108X NEMA Type 4-4X (IP-66) on-off control 580 (170)) 60
63115X NEMA Type 4-4X (IP-66) on-off control 1100 (322) 67
63125X NEMA Type 4-4X (IP-66) on-off control 1800 (527) 68
63130X NEMA Type 4-4X (IP-66) on-off control 2100 (615) 68
63140X NEMA Type 4-4X (IP-66) on-off control 2900 (849) 69
60115X-316L 316 L Stainless Steel NEMA Type 4-4X (IP-66) on-off control (customer supplies own filter)** 1100 (322) 72
60125X-316L 316 L Stainless Steel NEMA Type 4-4X (IP-66) on-off control (customer supplies own filter)** 1800 (527) 73
60130X-316L 316 L Stainless Steel NEMA Type 4-4X (IP-66) on-off control (customer supplies own filter)** 2100 (615) 74
60140X-316L 316 L Stainless Steel NEMA Type 4-4X (IP-66) on-off control (customer supplies own filter)** 2900 (849) 76

** In 316 environments normally customers will already have special filtration systems.

*Cooling effect based on 95°F temperature inside cabinet, 100 PSIG (6.9 BAR) compressor inlet pressure, and 70ºF (21ºC) inlet temperature.

BTU/hr. figures rounded to nearest 100 BTU/hr (1 WATT).

All Continuous Operation models include the cooling unit, filter with auto drain and cold air distribution kit.

All On-Off control units include the cooling unit, filter with auto drain, cold air distribution kit, solenoid valve and thermostat.

Calculating Heat Load

Calculating Heat Load

Total heat load consists of the heat transfer from outside your panel and from the heat dissipated inside the control unit.

Useful terms and conversions:

1 BTU/hr = 0.293 watts
1 BTU/hr – 0.000393 horsepower
1 Watt = 3.415 BTU/hr
1 horsepower = 2544 BTU/hr
1 Watt = 0.00134 horsepower
1 Square Foot = 0.0929 square meters
1 Square Meter = 10.76 square foot

Typical fan capacity:

4″ fan: 100 CFM (2832 LPM)
6″ fan: 220 CFM (6230 LPM)
8″ fan: 340 CFM (9628 LPM)
10″ fan 550 CFM (15574 LPM)

BTU/hr. cooling effect from fan 1.08 x (temp. inside panel in °F – temp. outside panel in degrees F) x CFM.

Watts cooling effect from fan: 0.16 x (temp. inside panel in °C – temp. outside panel in degrees C) x LPM.

Calculating BTU/hr. or Watts:

  1. Determine the heat generated inside the enclosure. Approximations may be necessary. For example, if you know the power generated inside the unit, assume 10% of the energy is dissipated as heat.
  2. For heat transfer from the outside, calculate the area exposed to the atmosphere except for the top of the control panel.
  3. Choose the internal temperature you wish to have, and choose the temperature difference between it and the maximum external temperature expected.
  4. From the conversion table that follows, determine the BTU/hr. per square foot (or watts per square meter) for the temperature difference.
  5. Multiply the panel surface area times the BTU/hr. per square foot (or watts per square meter) to get the external heat transfer in BTU/hr or in watts.
  6. Sum the internal and external heat loads calculated.
  7. If you do not know the power used in the enclosure but you can measure temperatures, then measure the temperature difference between the outside at current temperature, and the present internal cabinet temperature.
  8. Note size and number of any external fans. Provide this information to Nex Flow™  to assist in sizing the appropriate cooling system.
Temperature Difference in °F BTU/hr./sq. ft. Temperature Difference in °C Watts/sq.m
5 1.5 3 5.2
10 3.3 6 11.3
15 5.1 9 17.6
20 7.1 12 24.4
25 9.1 15 31.4
30 11.3 18 39.5
35 13.8 21 47.7
40 16.2 24 55.6

Example:

The control panel coolers have two frequency drives totaling 10 horsepower and one module rated at 100 watts. The maximum outside temperature expected is 105°F or 40.5°C. The area of the control panel cooler exposed sides, except for the top is 42 square feet or 3.9 square meters. We want the internal temperature to be 95° or 35°C.

Total internal power is 10 hp x 746 watts/hp – 7460 plus 100 watts = 7560 watts.
Assume 10% forms heat = an internal heat load of 756 watts.

Or

Total internal power is 10 hp x 2544 BTU/hp = 25440 BTU/hr plus 100 watts x 3.415 BTU/hr/watt = 25782 BTU/hr.

Assume 10% forms heat = an internal heat load of 2578 BTU/hr.

External heat load: The temperature difference between the desired temperature and the outside is 10°F or 5.5°C. Using the conversions (and interpolating where necessary) we multiply the area by the conversion factor:

42 sq. ft x 3.3 – 139 BTU/hr or 3.9 sq. m x 10.3 = 40 watts

Total Heat Load: 756 + 40 – 796 watts or 2578 + 139 – 2717 BTU/hr.

You would use a Model 61040 for constant operation or a Model 63040 for one-off control. (Rated at 2900 BTU/hr or 849 watts).

Pagpepresyo

Prices are in US dollars – ex works Cincinnati, OH, USA for orders

in USA and Richmond Hill, ON, Canada for international orders.

Tel : +1-416-410-1313   Fax : +1-416-410-180 or +1-716-626-3001

website : www.nexflow.com

email : sales@nexflow.com


Makipag-ugnayan sa amin

We use cookies to give you the best online experience. By agreeing you accept the use of cookies in accordance with our cookie policy.