盲孔清洁系统 | Nex Flow Air Products

盲孔清洁系统

产品概述

清理盲孔或深孔中的碎屑非常重要,同时还带有危险性。一般都会利用喷嘴对着深孔吹气来处理,不过这样会让废屑飞散,把您的自动化设备弄得有脏又乱;或者在用手来处理,但这样也会弄得飞屑到处都是引起脏乱,而且有一定危险性,因为操作的时候还必须得有保护措施,以免受伤。盲孔清洁系统最大的特点就是可以提高安全性,并最大限度地减少飞屑脏乱。现在市场上也出现了其他的类似产品,它们采用喷嘴往深孔吹气,同时采用抽真空来吸走吹出来的废屑。然而,这样做效果并好,因为往里面吹气和抽真空,是一对矛盾操作。而我们这个新系统,仅依靠强大的吹气作用来处理那些难以清理的部件钻孔,利用文丘里效应从深孔中将灰尘和碎屑抽提出来。

它设计特别,操作时严密覆盖住孔口,同时使用特殊结构的喷嘴将压缩空气吹入孔中。深盲孔中的所有东西都会被吹起最后收集在可拆卸收集袋里。不会有人和东西飞散到目标部件或机器设施上,清洁过程也更彻底、更安全。

盲孔清洁系统由三个特制部分构成:喷枪组件、用于安装各种大小喷嘴的适配器、喷嘴。不同的喷嘴可应用于不同的孔径和孔深。这款清洁套装里面配有用于连接各种大小喷嘴的孔洞适配器,各种喷嘴,以及能够自动排水的除水过滤器。这套系统用的是自动化作业环境,可根据需要随时通过供气系统向目标小孔内吹气,而不是采用手动清洁作业中所使用的那类喷枪。我们还可以定做产品,满足您应用场合的特殊要求。

应用

  • 无活动部件
  • 使用空气动力,而非电力
  • 铝合金铸造结构
  • 轻巧易携带
  • 可提供不同孔径和孔深范围的各种组合套装
  • 可定做

特点/优势

  • 免维护
  • 只要按说明使用,会非常安全
  • 使用寿命长、符合人体工程学
  • 不用电,没有电击危险
  • 压缩空气消耗低

视频

X-Stream™盲孔清洁系统的工作原理

该系统配有的软管卡子和废料收集袋(F),通过一段塑料软管连接到清洁枪(B)。压缩空气通过定制的空气软管(A)向装置供气。可拆卸的孔洞适配器(E)与清洁枪相连。只需将孔洞适配器(C)放在槽、孔或容器的上方即可将空洞的口部完全覆。扣动喷枪上的扳机,压缩空气便会通过喷嘴(D)吹入槽、孔或容器中,将碎屑清除。当收集袋装满后,只需松开软管上的卡子,取下袋子,清理后再装上去。

规格

深孔清洁系统——配有清洁枪,采用铝合金铸造

孔洞适配器、喷嘴、收集袋c/w软管卡子和用于连接的塑料软管

Model Description
48104-16-15 Blind Hole Cleaning System for Max. Hole Dia. of 16 mm and hole depth of 50 mm.
48104-20-15 Blind Hole Cleaning System for Max. Hole Dia. of 20 mm and hole depth of 50 mm.
48104-25-15 Blind Hole Cleaning System for Max. Hole Dia. of 25 mm and hole depth of 50 mm.
48104-16-75 Blind Hole Cleaning System for Max. Hole Dia. of 16 mm and hole depth of 90 mm.
48104-20-75 Blind Hole Cleaning System for Max. Hole Dia. of 20 mm and hole depth of 90 mm.
48104-25-75 Blind Hole Cleaning System for Max. Hole Dia. of 25 mm and hole depth of 90 mm.
48104-16-150 Blind Hole Cleaning System for Max. Hole Dia. of 16 mm and hole depth of 165 mm.
48104-20-150 Blind Hole Cleaning System for Max. Hole Dia. of 20 mm and hole depth of 165 mm.
48104-25-150 Blind Hole Cleaning System for Max. Hole Dia. of 25 mm and hole depth of 165 mm.
48104-16-230 Blind Hole Cleaning System for Max. Hole Dia. of 16 mm and hole depth of 245 mm.
48104-20-230 Blind Hole Cleaning System for Max. Hole Dia. of 20 mm and hole depth of 245 mm.
48104-25-230 Blind Hole Cleaning System for Max. Hole Dia. of 25 mm and hole depth of 245 mm.
48104-16-300 Blind Hole Cleaning System for Max. Hole Dia. of 16 mm and hole depth of 315 mm.
48104-20-300 Blind Hole Cleaning System for Max. Hole Dia. of 20 mm and hole depth of 315 mm.
48104-25-300 Blind Hole Cleaning System for Max. Hole Dia. of 25 mm and hole depth of 315 mm.
48104-16-375 Blind Hole Cleaning System for Max. Hole Dia. of 16 mm and hole depth of 390 mm.
48104-20-375 Blind Hole Cleaning System for Max. Hole Dia. of 20 mm and hole depth of 390 mm.
48104-25-375 Blind Hole Cleaning System for Max. Hole Dia. of 25 mm and hole depth of 390 mm.
48104-16-450 Blind Hole Cleaning System for Max. Hole Dia. of 16 mm and hole depth of 465 mm.
48104-20-450 Blind Hole Cleaning System for Max. Hole Dia. of 20 mm and hole depth of 465 mm.
48104-25-450 Blind Hole Cleaning System for Max. Hole Dia. of 25 mm and hole depth of 465 mm.
48104-16-510 Blind Hole Cleaning System for Max. Hole Dia. of 16 mm and hole depth of 525 mm.
48104-20-510 Blind Hole Cleaning System for Max. Hole Dia. of 20 mm and hole depth of 525 mm.
48104-25-510 Blind Hole Cleaning System for Max. Hole Dia. of 25 mm and hole depth of 525 mm.
COMPLETE KIT
48105 Blind Hole Cleaning System  Kit with All Hole Adaptors and all nozzles.
Plus water removal filter c/w auto drain
48102-16 Blind Hole Gun c/w Adaptor for Maximum Hole Diameter of 16 mm – no nozzles
48102-20 Blind Hole Gun c/w Adaptor for Maximum Hole Diameter of 20 mm – no nozzles
48102-25 Blind Hole Gun c/w Adaptor for Maximum Hole Diameter of 25 mm – no nozzles
48100-16 Adaptor Only for Maximum Hole Diameter of 16 mm
48100-20 Adaptor Only for Maximum Hole Diameter of 20 mm
48100-25 Adaptor Only for Maximum Hole Diameter of 25 mm
NOTE: all standard nozzles below are for minimum inside diameter holes of 7mm. special small nozzles for smaller holes and non-standard cavities are available on request.
48103-150 Nozzle Length – 150 mm for hole depth up to 165 mm (20 SCFM @80 PSIG)
48103-230 Nozzle Length – 230 mm for hole depth up to 245 mm (20 SCFM @80 PSIG)
48103-300 Nozzle Length – 300 mm for hole depth up to 315 mm (20 SCFM @80 PSIG)
48103-375 Nozzle Length – 375 mm for hole depth up to 390 mm (20 SCFM @80 PSIG)
48103-450 Nozzle Length – 450 mm for hole depth up to 465 mm (20 SCFM @80 PSIG)
48103-510 Nozzle Length – 510 mm for hole depth up to 525 mm (20 SCFM @80 PSIG)
48104-0 Bag with plastic hose and Stainless Steel hose clamp

Prices are in US dollars – ex works Cincinnati, OH, USA for orders in USA

Richmond Hill, ON, Canada for international orders.

website : www.nexflow.com

email : sales@nexflow.com


概观

产品概述

清理盲孔或深孔中的碎屑非常重要,同时还带有危险性。一般都会利用喷嘴对着深孔吹气来处理,不过这样会让废屑飞散,把您的自动化设备弄得有脏又乱;或者在用手来处理,但这样也会弄得飞屑到处都是引起脏乱,而且有一定危险性,因为操作的时候还必须得有保护措施,以免受伤。盲孔清洁系统最大的特点就是可以提高安全性,并最大限度地减少飞屑脏乱。现在市场上也出现了其他的类似产品,它们采用喷嘴往深孔吹气,同时采用抽真空来吸走吹出来的废屑。然而,这样做效果并好,因为往里面吹气和抽真空,是一对矛盾操作。而我们这个新系统,仅依靠强大的吹气作用来处理那些难以清理的部件钻孔,利用文丘里效应从深孔中将灰尘和碎屑抽提出来。

它设计特别,操作时严密覆盖住孔口,同时使用特殊结构的喷嘴将压缩空气吹入孔中。深盲孔中的所有东西都会被吹起最后收集在可拆卸收集袋里。不会有人和东西飞散到目标部件或机器设施上,清洁过程也更彻底、更安全。

盲孔清洁系统由三个特制部分构成:喷枪组件、用于安装各种大小喷嘴的适配器、喷嘴。不同的喷嘴可应用于不同的孔径和孔深。这款清洁套装里面配有用于连接各种大小喷嘴的孔洞适配器,各种喷嘴,以及能够自动排水的除水过滤器。这套系统用的是自动化作业环境,可根据需要随时通过供气系统向目标小孔内吹气,而不是采用手动清洁作业中所使用的那类喷枪。我们还可以定做产品,满足您应用场合的特殊要求。

应用

  • 无活动部件
  • 使用空气动力,而非电力
  • 铝合金铸造结构
  • 轻巧易携带
  • 可提供不同孔径和孔深范围的各种组合套装
  • 可定做
优点

特点/优势

  • 免维护
  • 只要按说明使用,会非常安全
  • 使用寿命长、符合人体工程学
  • 不用电,没有电击危险
  • 压缩空气消耗低
视频

视频

X-Stream™盲孔清洁系统的工作原理

该系统配有的软管卡子和废料收集袋(F),通过一段塑料软管连接到清洁枪(B)。压缩空气通过定制的空气软管(A)向装置供气。可拆卸的孔洞适配器(E)与清洁枪相连。只需将孔洞适配器(C)放在槽、孔或容器的上方即可将空洞的口部完全覆。扣动喷枪上的扳机,压缩空气便会通过喷嘴(D)吹入槽、孔或容器中,将碎屑清除。当收集袋装满后,只需松开软管上的卡子,取下袋子,清理后再装上去。

规格

规格

深孔清洁系统——配有清洁枪,采用铝合金铸造

孔洞适配器、喷嘴、收集袋c/w软管卡子和用于连接的塑料软管

Model Description
48104-16-15 Blind Hole Cleaning System for Max. Hole Dia. of 16 mm and hole depth of 50 mm.
48104-20-15 Blind Hole Cleaning System for Max. Hole Dia. of 20 mm and hole depth of 50 mm.
48104-25-15 Blind Hole Cleaning System for Max. Hole Dia. of 25 mm and hole depth of 50 mm.
48104-16-75 Blind Hole Cleaning System for Max. Hole Dia. of 16 mm and hole depth of 90 mm.
48104-20-75 Blind Hole Cleaning System for Max. Hole Dia. of 20 mm and hole depth of 90 mm.
48104-25-75 Blind Hole Cleaning System for Max. Hole Dia. of 25 mm and hole depth of 90 mm.
48104-16-150 Blind Hole Cleaning System for Max. Hole Dia. of 16 mm and hole depth of 165 mm.
48104-20-150 Blind Hole Cleaning System for Max. Hole Dia. of 20 mm and hole depth of 165 mm.
48104-25-150 Blind Hole Cleaning System for Max. Hole Dia. of 25 mm and hole depth of 165 mm.
48104-16-230 Blind Hole Cleaning System for Max. Hole Dia. of 16 mm and hole depth of 245 mm.
48104-20-230 Blind Hole Cleaning System for Max. Hole Dia. of 20 mm and hole depth of 245 mm.
48104-25-230 Blind Hole Cleaning System for Max. Hole Dia. of 25 mm and hole depth of 245 mm.
48104-16-300 Blind Hole Cleaning System for Max. Hole Dia. of 16 mm and hole depth of 315 mm.
48104-20-300 Blind Hole Cleaning System for Max. Hole Dia. of 20 mm and hole depth of 315 mm.
48104-25-300 Blind Hole Cleaning System for Max. Hole Dia. of 25 mm and hole depth of 315 mm.
48104-16-375 Blind Hole Cleaning System for Max. Hole Dia. of 16 mm and hole depth of 390 mm.
48104-20-375 Blind Hole Cleaning System for Max. Hole Dia. of 20 mm and hole depth of 390 mm.
48104-25-375 Blind Hole Cleaning System for Max. Hole Dia. of 25 mm and hole depth of 390 mm.
48104-16-450 Blind Hole Cleaning System for Max. Hole Dia. of 16 mm and hole depth of 465 mm.
48104-20-450 Blind Hole Cleaning System for Max. Hole Dia. of 20 mm and hole depth of 465 mm.
48104-25-450 Blind Hole Cleaning System for Max. Hole Dia. of 25 mm and hole depth of 465 mm.
48104-16-510 Blind Hole Cleaning System for Max. Hole Dia. of 16 mm and hole depth of 525 mm.
48104-20-510 Blind Hole Cleaning System for Max. Hole Dia. of 20 mm and hole depth of 525 mm.
48104-25-510 Blind Hole Cleaning System for Max. Hole Dia. of 25 mm and hole depth of 525 mm.
COMPLETE KIT
48105 Blind Hole Cleaning System  Kit with All Hole Adaptors and all nozzles.
Plus water removal filter c/w auto drain
48102-16 Blind Hole Gun c/w Adaptor for Maximum Hole Diameter of 16 mm – no nozzles
48102-20 Blind Hole Gun c/w Adaptor for Maximum Hole Diameter of 20 mm – no nozzles
48102-25 Blind Hole Gun c/w Adaptor for Maximum Hole Diameter of 25 mm – no nozzles
48100-16 Adaptor Only for Maximum Hole Diameter of 16 mm
48100-20 Adaptor Only for Maximum Hole Diameter of 20 mm
48100-25 Adaptor Only for Maximum Hole Diameter of 25 mm
NOTE: all standard nozzles below are for minimum inside diameter holes of 7mm. special small nozzles for smaller holes and non-standard cavities are available on request.
48103-150 Nozzle Length – 150 mm for hole depth up to 165 mm (20 SCFM @80 PSIG)
48103-230 Nozzle Length – 230 mm for hole depth up to 245 mm (20 SCFM @80 PSIG)
48103-300 Nozzle Length – 300 mm for hole depth up to 315 mm (20 SCFM @80 PSIG)
48103-375 Nozzle Length – 375 mm for hole depth up to 390 mm (20 SCFM @80 PSIG)
48103-450 Nozzle Length – 450 mm for hole depth up to 465 mm (20 SCFM @80 PSIG)
48103-510 Nozzle Length – 510 mm for hole depth up to 525 mm (20 SCFM @80 PSIG)
48104-0 Bag with plastic hose and Stainless Steel hose clamp
价钱

Prices are in US dollars – ex works Cincinnati, OH, USA for orders in USA

Richmond Hill, ON, Canada for international orders.

website : www.nexflow.com

email : sales@nexflow.com


联系我们

We use cookies to give you the best online experience. By agreeing you accept the use of cookies in accordance with our cookie policy.