Silent X-Stream™机箱机柜冷却器 | Nex Flow Air Products

Silent X-Stream™机箱机柜冷却器

产品概述

静音X-Stream™ Frigid-X™系列机箱机柜冷却器是专用于电控制机箱、机柜的冷却器,它利用不锈钢涡流管将压缩空气转化成冷空气,可用于电控机箱吹扫和冷却,而且使用成本非常低。在冷、热端均有消声器,根据各款产品不同的性能,可将噪音控制在64dBA以下。热端消声器同时还起到了“隔热防护”的作用,用手握住也不会觉得太烫。热空气就是从热端消声器内部安全排出的。

该机箱冷却器系列产品占用体积小,且通过标准的电气卡口进行安装,安装过程几分钟内即可完成。基本没有活动部件。

*美国专利号8,616,010 / 其他国家:已获专利或正在申请

注意:请务必慎用不合规的工具来处理您的电气箱柜,以免劣质产品损坏您的机箱。

特点/优势

  • 成本低
  • 体积小
  • 无氯氟烃(CFCs)
  • 可快速安装
  • 可稳定机箱机柜内温度和湿度
  • 基本无需维护(无活动部件)
  • 通过标准电气卡口安装
  • 防止过热损毁和频繁跳闸
  • 淘汰风扇和过滤器
  • 能让机柜内维持正压,从而防止污物污染
  • 适用于各种环境,包括高达200℉的高温环境

Videos

How The Silent X-Stream™ Panel Cooler Works

The regular Frigid-X Panel Coolers are under 78 dBA for noise level but in some instances it is not enough and a quieter version is necessary.   This is where the Silent X-Stream Panel Cooler can be utilized. It can reduce noise levels to 65 dBA   It works the same way as a regular Panel Cooler where compressed air enters at point (A) into the vortex tube component of the panel cooler.  The vortex tube creates two streams of compressed air – a hot stream at (B) and a cold stream at (C). The hot air stream from the vortex tube is vented outside the system at (D) after internal muffling. An additional Hot End muffler (I) reduces the noise further and also acts a protection cover over the hot end should anyone try to grab the unit.   Hot air from inside the control panel is vented at point (E) to the outside. Cold air goes into the control panel at (F) into an additional cold end muffler (J) and then into the cold distribution hose (G). Holes (H) are punched into the hose kit to distribute the cold air inside the panel. A muffler (I) further reduces the noise level of the exhausting at the end of the hose.

As with the standard Panel Cooler there is the optional Thermostats and Solenoid Valve System and Electronic Thermostats System for on-off control and Bypass system if constant purge is required inside (to keep out a dirty environment).

Dimensions

Cabinet Cooler Dimensions

可选款型

Panel Coolers, Panel Cooler, Panel Air Conditioner, Cabinet Enclosure Cooler, Electrical Panel Air Conditioners, Cabinet Cooling Solution, Cooler Master Cabinet, Panel Air Conditioner, Adjustable Thermostat, Electrical Panel Coolers, How to Cool Electrical Enclosures, Electronic Temperature Control

所有产品均采用303/304不锈钢材质,可用于腐蚀性环境,使用寿命长。在冷、热端装有消声装置,各款产品根据性能的不同,噪音均可控制在64dBA以下。热端消声器同时还起到了“隔热防护”的作用,即使用手握住也不会觉得太烫。

静音X-Stream™ NEMA 12 (IP56) 低噪机箱冷却器

  • 静音X-Stream™ NEMA 12 (IP56) 低噪机箱冷却器,适用于标准机箱、机柜。

静音X-Stream™ NEMA 3R (IP14) 低噪机箱冷却器

  • 静音X-Stream™ NEMA 3R (IP14) 低噪机箱冷却器,适用于户外机柜、机箱。

静音X-Stream™ NEMA 3R (IP14) 低噪机箱冷却器

  • 静音X-Stream™ NEMA 4-4x (IP66) 低噪机箱冷却器,适用于冲洗系统中的机柜、机箱。

Contact Nex Flow™ for assistance in sizing cabinet enclosure cooler – Frigid-X series. See Below for Sizing Specifications

MODEL NO. VERSION CAPACITY BTU/hr (Watts)* dBA at 80 PSIG (5.5 bar)
61104X NEMA Type 4-4X (IP-66) Continuous Operation 290 (85) 58
61108X NEMA Type 4-4X (IP-66) Continuous Operation 580 (170) 60
61115X NEMA Type 4-4X (IP-66) Continuous Operation 1100 (322) 67
61125X NEMA Type 4-4X (IP-66) Continuous Operation 1800 (527) 68
61130X NEMA Type 4-4X (IP-66) Continuous Operation 2100 (615) 68
61140X NEMA Type 4-4X (IP-66) Continuous Operation 2900 (849) 69
63104X NEMA type 4-4X (IP-66) on-off control 290 (85) 58
63108X NEMA Type 4-4X (IP-66) on-off control 580 (170)) 60
63115X NEMA Type 4-4X (IP-66) on-off control 1100 (322) 67
63125X NEMA Type 4-4X (IP-66) on-off control 1800 (527) 68
63130X NEMA Type 4-4X (IP-66) on-off control 2100 (615) 68
63140X NEMA Type 4-4X (IP-66) on-off control 2900 (849) 69
60115X-316L 316 L Stainless Steel NEMA Type 4-4X (IP-66) on-off control (customer supplies own filter)** 1100 (322) 72
60125X-316L 316 L Stainless Steel NEMA Type 4-4X (IP-66) on-off control (customer supplies own filter)** 1800 (527) 73
60130X-316L 316 L Stainless Steel NEMA Type 4-4X (IP-66) on-off control (customer supplies own filter)** 2100 (615) 74
60140X-316L 316 L Stainless Steel NEMA Type 4-4X (IP-66) on-off control (customer supplies own filter)** 2900 (849) 76

** In 316 environments normally customers will already have special filtration systems.

*Cooling effect based on 95°F temperature inside cabinet, 100 PSIG (6.9 BAR) compressor inlet pressure, and 70ºF (21ºC) inlet temperature.

BTU/hr. figures rounded to nearest 100 BTU/hr (1 WATT).

All Continuous Operation models include the cooling unit, filter with auto drain and cold air distribution kit.

All On-Off control units include the cooling unit, filter with auto drain, cold air distribution kit, solenoid valve and thermostat.

Calculating Heat Load

Total heat load consists of the heat transfer from outside your panel and from the heat dissipated inside the control unit.

Useful terms and conversions:

1 BTU/hr = 0.293 watts
1 BTU/hr – 0.000393 horsepower
1 Watt = 3.415 BTU/hr
1 horsepower = 2544 BTU/hr
1 Watt = 0.00134 horsepower
1 Square Foot = 0.0929 square meters
1 Square Meter = 10.76 square foot

Typical fan capacity:

4″ fan: 100 CFM (2832 LPM)
6″ fan: 220 CFM (6230 LPM)
8″ fan: 340 CFM (9628 LPM)
10″ fan 550 CFM (15574 LPM)

BTU/hr. cooling effect from fan 1.08 x (temp. inside panel in °F – temp. outside panel in degrees F) x CFM.

Watts cooling effect from fan: 0.16 x (temp. inside panel in °C – temp. outside panel in degrees C) x LPM.

Calculating BTU/hr. or Watts:

  1. Determine the heat generated inside the enclosure. Approximations may be necessary. For example, if you know the power generated inside the unit, assume 10% of the energy is dissipated as heat.
  2. For heat transfer from the outside, calculate the area exposed to the atmosphere except for the top of the control panel.
  3. Choose the internal temperature you wish to have, and choose the temperature difference between it and the maximum external temperature expected.
  4. From the conversion table that follows, determine the BTU/hr. per square foot (or watts per square meter) for the temperature difference.
  5. Multiply the panel surface area times the BTU/hr. per square foot (or watts per square meter) to get the external heat transfer in BTU/hr or in watts.
  6. Sum the internal and external heat loads calculated.
  7. If you do not know the power used in the enclosure but you can measure temperatures, then measure the temperature difference between the outside at current temperature, and the present internal cabinet temperature.
  8. Note size and number of any external fans. Provide this information to Nex Flow™  to assist in sizing the appropriate cooling system.
Temperature Difference in °F BTU/hr./sq. ft. Temperature Difference in °C Watts/sq.m
5 1.5 3 5.2
10 3.3 6 11.3
15 5.1 9 17.6
20 7.1 12 24.4
25 9.1 15 31.4
30 11.3 18 39.5
35 13.8 21 47.7
40 16.2 24 55.6

Example:

The control panel coolers have two frequency drives totaling 10 horsepower and one module rated at 100 watts. The maximum outside temperature expected is 105°F or 40.5°C. The area of the control panel cooler exposed sides, except for the top is 42 square feet or 3.9 square meters. We want the internal temperature to be 95° or 35°C.

Total internal power is 10 hp x 746 watts/hp – 7460 plus 100 watts = 7560 watts.
Assume 10% forms heat = an internal heat load of 756 watts.

Or

Total internal power is 10 hp x 2544 BTU/hp = 25440 BTU/hr plus 100 watts x 3.415 BTU/hr/watt = 25782 BTU/hr.

Assume 10% forms heat = an internal heat load of 2578 BTU/hr.

External heat load: The temperature difference between the desired temperature and the outside is 10°F or 5.5°C. Using the conversions (and interpolating where necessary) we multiply the area by the conversion factor:

42 sq. ft x 3.3 – 139 BTU/hr or 3.9 sq. m x 10.3 = 40 watts

Total Heat Load: 756 + 40 – 796 watts or 2578 + 139 – 2717 BTU/hr.

You would use a Model 61040 for constant operation or a Model 63040 for one-off control. (Rated at 2900 BTU/hr or 849 watts).


Prices are in US dollars – ex works Cincinnati, OH, USA for orders

in USA and Richmond Hill, ON, Canada for international orders.

Tel : +1-416-410-1313   Fax : +1-416-410-180 or +1-716-626-3001

website : www.nexflow.com

email : sales@nexflow.com


Overview

产品概述

静音X-Stream™ Frigid-X™系列机箱机柜冷却器是专用于电控制机箱、机柜的冷却器,它利用不锈钢涡流管将压缩空气转化成冷空气,可用于电控机箱吹扫和冷却,而且使用成本非常低。在冷、热端均有消声器,根据各款产品不同的性能,可将噪音控制在64dBA以下。热端消声器同时还起到了“隔热防护”的作用,用手握住也不会觉得太烫。热空气就是从热端消声器内部安全排出的。

该机箱冷却器系列产品占用体积小,且通过标准的电气卡口进行安装,安装过程几分钟内即可完成。基本没有活动部件。

*美国专利号8,616,010 / 其他国家:已获专利或正在申请

注意:请务必慎用不合规的工具来处理您的电气箱柜,以免劣质产品损坏您的机箱。

Advantages

特点/优势

  • 成本低
  • 体积小
  • 无氯氟烃(CFCs)
  • 可快速安装
  • 可稳定机箱机柜内温度和湿度
  • 基本无需维护(无活动部件)
  • 通过标准电气卡口安装
  • 防止过热损毁和频繁跳闸
  • 淘汰风扇和过滤器
  • 能让机柜内维持正压,从而防止污物污染
  • 适用于各种环境,包括高达200℉的高温环境
Videos

Videos

How The Silent X-Stream™ Panel Cooler Works

The regular Frigid-X Panel Coolers are under 78 dBA for noise level but in some instances it is not enough and a quieter version is necessary.   This is where the Silent X-Stream Panel Cooler can be utilized. It can reduce noise levels to 65 dBA   It works the same way as a regular Panel Cooler where compressed air enters at point (A) into the vortex tube component of the panel cooler.  The vortex tube creates two streams of compressed air – a hot stream at (B) and a cold stream at (C). The hot air stream from the vortex tube is vented outside the system at (D) after internal muffling. An additional Hot End muffler (I) reduces the noise further and also acts a protection cover over the hot end should anyone try to grab the unit.   Hot air from inside the control panel is vented at point (E) to the outside. Cold air goes into the control panel at (F) into an additional cold end muffler (J) and then into the cold distribution hose (G). Holes (H) are punched into the hose kit to distribute the cold air inside the panel. A muffler (I) further reduces the noise level of the exhausting at the end of the hose.

As with the standard Panel Cooler there is the optional Thermostats and Solenoid Valve System and Electronic Thermostats System for on-off control and Bypass system if constant purge is required inside (to keep out a dirty environment).

Dimensions

Dimensions

Cabinet Cooler Dimensions

可选款型

可选款型

Panel Coolers, Panel Cooler, Panel Air Conditioner, Cabinet Enclosure Cooler, Electrical Panel Air Conditioners, Cabinet Cooling Solution, Cooler Master Cabinet, Panel Air Conditioner, Adjustable Thermostat, Electrical Panel Coolers, How to Cool Electrical Enclosures, Electronic Temperature Control

所有产品均采用303/304不锈钢材质,可用于腐蚀性环境,使用寿命长。在冷、热端装有消声装置,各款产品根据性能的不同,噪音均可控制在64dBA以下。热端消声器同时还起到了“隔热防护”的作用,即使用手握住也不会觉得太烫。

静音X-Stream™ NEMA 12 (IP56) 低噪机箱冷却器

  • 静音X-Stream™ NEMA 12 (IP56) 低噪机箱冷却器,适用于标准机箱、机柜。

静音X-Stream™ NEMA 3R (IP14) 低噪机箱冷却器

  • 静音X-Stream™ NEMA 3R (IP14) 低噪机箱冷却器,适用于户外机柜、机箱。

静音X-Stream™ NEMA 3R (IP14) 低噪机箱冷却器

  • 静音X-Stream™ NEMA 4-4x (IP66) 低噪机箱冷却器,适用于冲洗系统中的机柜、机箱。

Contact Nex Flow™ for assistance in sizing cabinet enclosure cooler – Frigid-X series. See Below for Sizing Specifications

MODEL NO. VERSION CAPACITY BTU/hr (Watts)* dBA at 80 PSIG (5.5 bar)
61104X NEMA Type 4-4X (IP-66) Continuous Operation 290 (85) 58
61108X NEMA Type 4-4X (IP-66) Continuous Operation 580 (170) 60
61115X NEMA Type 4-4X (IP-66) Continuous Operation 1100 (322) 67
61125X NEMA Type 4-4X (IP-66) Continuous Operation 1800 (527) 68
61130X NEMA Type 4-4X (IP-66) Continuous Operation 2100 (615) 68
61140X NEMA Type 4-4X (IP-66) Continuous Operation 2900 (849) 69
63104X NEMA type 4-4X (IP-66) on-off control 290 (85) 58
63108X NEMA Type 4-4X (IP-66) on-off control 580 (170)) 60
63115X NEMA Type 4-4X (IP-66) on-off control 1100 (322) 67
63125X NEMA Type 4-4X (IP-66) on-off control 1800 (527) 68
63130X NEMA Type 4-4X (IP-66) on-off control 2100 (615) 68
63140X NEMA Type 4-4X (IP-66) on-off control 2900 (849) 69
60115X-316L 316 L Stainless Steel NEMA Type 4-4X (IP-66) on-off control (customer supplies own filter)** 1100 (322) 72
60125X-316L 316 L Stainless Steel NEMA Type 4-4X (IP-66) on-off control (customer supplies own filter)** 1800 (527) 73
60130X-316L 316 L Stainless Steel NEMA Type 4-4X (IP-66) on-off control (customer supplies own filter)** 2100 (615) 74
60140X-316L 316 L Stainless Steel NEMA Type 4-4X (IP-66) on-off control (customer supplies own filter)** 2900 (849) 76

** In 316 environments normally customers will already have special filtration systems.

*Cooling effect based on 95°F temperature inside cabinet, 100 PSIG (6.9 BAR) compressor inlet pressure, and 70ºF (21ºC) inlet temperature.

BTU/hr. figures rounded to nearest 100 BTU/hr (1 WATT).

All Continuous Operation models include the cooling unit, filter with auto drain and cold air distribution kit.

All On-Off control units include the cooling unit, filter with auto drain, cold air distribution kit, solenoid valve and thermostat.

Calculating Heat Load

Calculating Heat Load

Total heat load consists of the heat transfer from outside your panel and from the heat dissipated inside the control unit.

Useful terms and conversions:

1 BTU/hr = 0.293 watts
1 BTU/hr – 0.000393 horsepower
1 Watt = 3.415 BTU/hr
1 horsepower = 2544 BTU/hr
1 Watt = 0.00134 horsepower
1 Square Foot = 0.0929 square meters
1 Square Meter = 10.76 square foot

Typical fan capacity:

4″ fan: 100 CFM (2832 LPM)
6″ fan: 220 CFM (6230 LPM)
8″ fan: 340 CFM (9628 LPM)
10″ fan 550 CFM (15574 LPM)

BTU/hr. cooling effect from fan 1.08 x (temp. inside panel in °F – temp. outside panel in degrees F) x CFM.

Watts cooling effect from fan: 0.16 x (temp. inside panel in °C – temp. outside panel in degrees C) x LPM.

Calculating BTU/hr. or Watts:

  1. Determine the heat generated inside the enclosure. Approximations may be necessary. For example, if you know the power generated inside the unit, assume 10% of the energy is dissipated as heat.
  2. For heat transfer from the outside, calculate the area exposed to the atmosphere except for the top of the control panel.
  3. Choose the internal temperature you wish to have, and choose the temperature difference between it and the maximum external temperature expected.
  4. From the conversion table that follows, determine the BTU/hr. per square foot (or watts per square meter) for the temperature difference.
  5. Multiply the panel surface area times the BTU/hr. per square foot (or watts per square meter) to get the external heat transfer in BTU/hr or in watts.
  6. Sum the internal and external heat loads calculated.
  7. If you do not know the power used in the enclosure but you can measure temperatures, then measure the temperature difference between the outside at current temperature, and the present internal cabinet temperature.
  8. Note size and number of any external fans. Provide this information to Nex Flow™  to assist in sizing the appropriate cooling system.
Temperature Difference in °F BTU/hr./sq. ft. Temperature Difference in °C Watts/sq.m
5 1.5 3 5.2
10 3.3 6 11.3
15 5.1 9 17.6
20 7.1 12 24.4
25 9.1 15 31.4
30 11.3 18 39.5
35 13.8 21 47.7
40 16.2 24 55.6

Example:

The control panel coolers have two frequency drives totaling 10 horsepower and one module rated at 100 watts. The maximum outside temperature expected is 105°F or 40.5°C. The area of the control panel cooler exposed sides, except for the top is 42 square feet or 3.9 square meters. We want the internal temperature to be 95° or 35°C.

Total internal power is 10 hp x 746 watts/hp – 7460 plus 100 watts = 7560 watts.
Assume 10% forms heat = an internal heat load of 756 watts.

Or

Total internal power is 10 hp x 2544 BTU/hp = 25440 BTU/hr plus 100 watts x 3.415 BTU/hr/watt = 25782 BTU/hr.

Assume 10% forms heat = an internal heat load of 2578 BTU/hr.

External heat load: The temperature difference between the desired temperature and the outside is 10°F or 5.5°C. Using the conversions (and interpolating where necessary) we multiply the area by the conversion factor:

42 sq. ft x 3.3 – 139 BTU/hr or 3.9 sq. m x 10.3 = 40 watts

Total Heat Load: 756 + 40 – 796 watts or 2578 + 139 – 2717 BTU/hr.

You would use a Model 61040 for constant operation or a Model 63040 for one-off control. (Rated at 2900 BTU/hr or 849 watts).

Pricing

Prices are in US dollars – ex works Cincinnati, OH, USA for orders

in USA and Richmond Hill, ON, Canada for international orders.

Tel : +1-416-410-1313   Fax : +1-416-410-180 or +1-716-626-3001

website : www.nexflow.com

email : sales@nexflow.com


联系我们

We use cookies to give you the best online experience. By agreeing you accept the use of cookies in accordance with our cookie policy.