标准离子气刀 | Nex Flow Air Products

标准离子气刀

产品概述

标准Air-Blade™离子气刀由高品质的Standard Air-Blade™气刀和世界顶级静电控制造商Haug所生产的优质静电棒结合而成,可用于去除远距离、表面的目标上的静电,且速度非常快。

标准Air-Blade™风刀非常高效,且十分耐用,适用于多种吹扫作业。而静音X-stream™Air Blade™则较之效率更高,噪音更低。两者均采用了优质的Haug静电棒,即适用于大多数条件的RN棒或者是适用于极高电荷和除电速率的超强VS棒(三重强力型)。

标准Air-Blade™离子气刀利用少量空气通过可调节高压吹出“层流”气流,以此搭载离子对目标物体进行静电消除,它有静电棒所不具备的远距离清扫能力和速度优势。

Haug的RN静电棒是标准型静电棒,可满足大多数应用场合,但对于电荷极为严重,且要求极高处理速度的情况下,就推荐使用强力型VS静电棒了。在清洗作业时(如医药领域),即便是在容易清洗的情况,若选择不当,也可能多花冤枉钱。

所有Haug静电棒都配有专利安全接头和全屏蔽电缆。电源是做工精良且是“可维修的”。我们提供两年保修服务(静电棒保修期为一年)。

特点/优势

  • 可从背部或两端连接。
  • 覆盖刀刃全长的气流(完整气流)。
  • 有可用于高温或腐蚀性环境的不锈钢款可选。
  • 产品设计精密,清洁方便且可放置灰尘进入静电棒内部,从而将损坏隐患降至最低。
  • 专利连接器,电缆带有特殊接地设计。
  • 即开即用、无活动部件。
  • 电源可维修,保修期为两年。
  • 安装方式灵活。
  • 可将多条气刀端对端进行拼接,获得加宽、无间隔的气幕流。
  • 针对特殊应用场合或特殊需要,还可提供耐高温,超强度,甚至可清洗的不锈钢特别款供选择。
  • 易于清洁和维护。
  • 没有单独的接地连接,接口连接十分牢靠,不会因为虚连引起火花或人员触电事故。
  • 节省压缩空气。
  • 省去更换电源带来的开支。 提供2年保修,保证产品质量。

视频

How The Standard Air Blade™ Ionizer Works

Compressed air enters at the rear (or end) ports at (A) (B). Air then follows the Coanda profile of the air knife and along the front face flowing over the ionizing (static) bar (C) creating a fine sheet of ionized air along the entire length of the ionizer as it leaves the air knife at point (D). The amplified air stream maximizes velocity and force and provides a well-defined sheet of ionized laminar flow for reduced energy use in the blow off of statically charged surfaces and to remove static at long distances from the assembly. For highly charged surfaces a stronger static bar is available (Triple X Air Blade ionizers).

电源

静电消除Air-Blade™离子气刀的电源有多个款型,有的还可以监测静电棒的效果。

Voltage Model Number Description
110V ENC-110/2 Two outlet (Can connect two static bars)
220V ENC-220/2 Two outlet (Can connect two static bars)
110V ENC-110/4 Four outlet (Can connect four static bars)
220V ENC-220/4 Four outlet (Can connect four static bars)
110V Multistat 110 Four outlet (Can connect four static bars, plus monitors performance. Can be connected into a system alarm or indicating light.)
220V Multistat 220 Four outlet (Can connect four)

產品規格

Static Elimination Air-Blade™ Ionizers are supplied in several versions.

Standard Air-Blade™ Ionizer with a standard Nex Flow Air Blade™ Air Knife and standard strength Model RN Haug static bar. These units are ideal for most static removal applications.
X-Stream Air-Blade™ Ionizer with the extra quiet Nex Flow X-Stream Air Blade™ Air Knife and standard Strength Model RN Haug static bar. These units apply to most static removal applications where noise levels must be extremely low.
Super Triple Standard Air-Blade™ Ionizer with a standard Nex Flow Air Blade™ Air Knife and a triple strength Model VS Haug static bar. These units are ideal for static removal applications where static charges are unusually high and extra ionization is required such as very high speed applications or materials that can produce very high charges such as Mylar or tissue.
Super Triple X-Stream Air-Blade™ Ionizer with extra quiet Nex Flow X-Stream Air Blade™ Air Knife and a triple strength Mode VS Haug static bar. These units are ideal for static removal applications where static charges are unusually high and extra ionization is required and where noise issues are important.
Special materials and static bars can be utilized for unique applications. If greater blow-off force is required, shims may be added for higher capacities.

Length Model Numbers
(X means with X-Stream Air-Blade™,150XX with RN static bar, 160xx means with VS static Bar)
3″ 15003/15003X
6″ 15006/15006X/16006/16006X
12″ 15012/15012X/16012/16012X
18″ 15018/15018X/16018/16018X
24″ 15024/15024X/16024/16024X
30″ 15030/15030X/15030/16030X
36″ 15036/15036X/16036/16036X

尺寸

Model “A” “OA”
3″ (76mm) 44mm 125mm
6″ (150mm) 90mm 200mm
8″ (203mm) 143mm 254mm
12″ (305mm) 250mm 351mm
18″ (457mm) 390mm 508mm
24″ (610mm) 543mm 661mm
36″ (914mm) 844mm 965mm

Prices are in US dollars – ex works Cincinnati, OH, USA for orders in USA

Richmond Hill, ON, Canada for international orders.

website : www.nexflow.com

email : sales@nexflow.com


概观

产品概述

标准Air-Blade™离子气刀由高品质的Standard Air-Blade™气刀和世界顶级静电控制造商Haug所生产的优质静电棒结合而成,可用于去除远距离、表面的目标上的静电,且速度非常快。

标准Air-Blade™风刀非常高效,且十分耐用,适用于多种吹扫作业。而静音X-stream™Air Blade™则较之效率更高,噪音更低。两者均采用了优质的Haug静电棒,即适用于大多数条件的RN棒或者是适用于极高电荷和除电速率的超强VS棒(三重强力型)。

标准Air-Blade™离子气刀利用少量空气通过可调节高压吹出“层流”气流,以此搭载离子对目标物体进行静电消除,它有静电棒所不具备的远距离清扫能力和速度优势。

Haug的RN静电棒是标准型静电棒,可满足大多数应用场合,但对于电荷极为严重,且要求极高处理速度的情况下,就推荐使用强力型VS静电棒了。在清洗作业时(如医药领域),即便是在容易清洗的情况,若选择不当,也可能多花冤枉钱。

所有Haug静电棒都配有专利安全接头和全屏蔽电缆。电源是做工精良且是“可维修的”。我们提供两年保修服务(静电棒保修期为一年)。

优点

特点/优势

  • 可从背部或两端连接。
  • 覆盖刀刃全长的气流(完整气流)。
  • 有可用于高温或腐蚀性环境的不锈钢款可选。
  • 产品设计精密,清洁方便且可放置灰尘进入静电棒内部,从而将损坏隐患降至最低。
  • 专利连接器,电缆带有特殊接地设计。
  • 即开即用、无活动部件。
  • 电源可维修,保修期为两年。
  • 安装方式灵活。
  • 可将多条气刀端对端进行拼接,获得加宽、无间隔的气幕流。
  • 针对特殊应用场合或特殊需要,还可提供耐高温,超强度,甚至可清洗的不锈钢特别款供选择。
  • 易于清洁和维护。
  • 没有单独的接地连接,接口连接十分牢靠,不会因为虚连引起火花或人员触电事故。
  • 节省压缩空气。
  • 省去更换电源带来的开支。 提供2年保修,保证产品质量。
视频

视频

How The Standard Air Blade™ Ionizer Works

Compressed air enters at the rear (or end) ports at (A) (B). Air then follows the Coanda profile of the air knife and along the front face flowing over the ionizing (static) bar (C) creating a fine sheet of ionized air along the entire length of the ionizer as it leaves the air knife at point (D). The amplified air stream maximizes velocity and force and provides a well-defined sheet of ionized laminar flow for reduced energy use in the blow off of statically charged surfaces and to remove static at long distances from the assembly. For highly charged surfaces a stronger static bar is available (Triple X Air Blade ionizers).

电源

电源

静电消除Air-Blade™离子气刀的电源有多个款型,有的还可以监测静电棒的效果。

Voltage Model Number Description
110V ENC-110/2 Two outlet (Can connect two static bars)
220V ENC-220/2 Two outlet (Can connect two static bars)
110V ENC-110/4 Four outlet (Can connect four static bars)
220V ENC-220/4 Four outlet (Can connect four static bars)
110V Multistat 110 Four outlet (Can connect four static bars, plus monitors performance. Can be connected into a system alarm or indicating light.)
220V Multistat 220 Four outlet (Can connect four)
產品規格

產品規格

Static Elimination Air-Blade™ Ionizers are supplied in several versions.

Standard Air-Blade™ Ionizer with a standard Nex Flow Air Blade™ Air Knife and standard strength Model RN Haug static bar. These units are ideal for most static removal applications.
X-Stream Air-Blade™ Ionizer with the extra quiet Nex Flow X-Stream Air Blade™ Air Knife and standard Strength Model RN Haug static bar. These units apply to most static removal applications where noise levels must be extremely low.
Super Triple Standard Air-Blade™ Ionizer with a standard Nex Flow Air Blade™ Air Knife and a triple strength Model VS Haug static bar. These units are ideal for static removal applications where static charges are unusually high and extra ionization is required such as very high speed applications or materials that can produce very high charges such as Mylar or tissue.
Super Triple X-Stream Air-Blade™ Ionizer with extra quiet Nex Flow X-Stream Air Blade™ Air Knife and a triple strength Mode VS Haug static bar. These units are ideal for static removal applications where static charges are unusually high and extra ionization is required and where noise issues are important.
Special materials and static bars can be utilized for unique applications. If greater blow-off force is required, shims may be added for higher capacities.

Length Model Numbers
(X means with X-Stream Air-Blade™,150XX with RN static bar, 160xx means with VS static Bar)
3″ 15003/15003X
6″ 15006/15006X/16006/16006X
12″ 15012/15012X/16012/16012X
18″ 15018/15018X/16018/16018X
24″ 15024/15024X/16024/16024X
30″ 15030/15030X/15030/16030X
36″ 15036/15036X/16036/16036X
尺寸

尺寸

Model “A” “OA”
3″ (76mm) 44mm 125mm
6″ (150mm) 90mm 200mm
8″ (203mm) 143mm 254mm
12″ (305mm) 250mm 351mm
18″ (457mm) 390mm 508mm
24″ (610mm) 543mm 661mm
36″ (914mm) 844mm 965mm
价钱

Prices are in US dollars – ex works Cincinnati, OH, USA for orders in USA

Richmond Hill, ON, Canada for international orders.

website : www.nexflow.com

email : sales@nexflow.com


联系我们

We use cookies to give you the best online experience. By agreeing you accept the use of cookies in accordance with our cookie policy.